Grab Bars 
by TSM
All stock grab
bars are stainless steel, 1-1/2" Diameter, 1-1/2" Wall Clearance,
Concealed Mount.
Grab bar
standard finish is brush stainless, with an option for a Knurl finish [ Non Slip
].
Standard grab
bars are straight bars for side and or rear mounting.
Specialty grab
bars are varying configurations for special conditions. They may not meet local
codes as they are for special conditions.
|
Model |
Description |
|
T01-BP |
Grab Bar Back Plate  |
|
T01-H18-CS1
T01-H18-CS1-P
T01-H24-CS1
T01-H24-CS1-P
T01-H32-CS1
T01-H32-CS1-P
T01-H36-CS1
T01-H36-CS1-P
T01-H42-CS1
T01-H42-CS1-P |
Grab Bar - 1-1/2" x 18" 
Grab Bar - 1-1/2" x 18" - Peen
Grab Bar - 1-1/2" x 24"
Grab Bar - 1-1/2" x 24" - Peen
Grab Bar - 1-1/2" x 32"
Grab Bar - 1-1/2" x 32" - Peen
Grab Bar - 1-1/2" x 36"
Grab Bar - 1-1/2" x 36" - Peen
Grab Bar - 1-1/2" x 42"
Grab Bar - 1-1/2" x 42" - Peen
|
|
T01-H48M-CS1
T01-H48M-CS1-P |
Grab Bar - 1-1/2" x 48" - Ctr.
Support 
Grab Bar - 1-1/2" x 48" - Ctr. Support - Peen
|
|
T01-S-2228 |
Grab Bar - Straddle - Movable Bar  |
|
T01-S-2424 |
Grab Bar - Straddle - Tank Type  |
|
T01-SS-230-L |
Grab Bar - Side - Left Hand  |
|
T01-SS-230-R |
Grab Bar - Side - Right Hand  |
|
T01-SS-3012-T |
Grab Bar - Swing up - With Tissue  |
|
T01-SS-3033-L |
Grab Bar - Leg - Left Hand  |
|
T01-SS-3033-R |
Grab Bar - Leg - Right Hand  |
|
T01-Z-308-9 |
Grab Bar - Dowel-Sleeve - 1-1/2" 
 |
